Alumil sliding systems

ALUMIL S300

 

The S300 is a thermal break system that allows sliding doors and windows to be made.
This system has better mechanical properties than the S100 system

 

– Material: AlMgSi0.5 (6060),
– Tensile strength: 215 N / mm2
– Brinell hardness: 2.75 Kg / dm3,
– Anode-oxide layer thickness: 18-23 microns,
– Coating thickness: 60-80 microns,
– Profile wall thickness: 1.4-2.0 mm,
– Thermal break: polyamide,
– Basic profile dimensions: wing-width 38mm / height 100mm,
– Fill: up to 20mm

ALUMIL S350

 

New requirements for sliding systems in line with modern trends in architecture that require unmistakable straight lines with minimal visible wing area. High levels of thermal insulation combined with new design variants make the S350 an ideal solution for modern buildings as well as for renovation of old ones.

 

– Base Wing Width: 35 mm
– Base wing height: 85 mm
– Glazing type: single or double up to 26 mm
– Glass weight up to 120 kg per wing
– Two-brush seal
– Stainless steel lead guide for great durability and easy gliding
– One or more lock points
– Type of thermal insulation: 24 mm polyamide

ALUMIL S700

 

The S700 is the highest-rated lift-and-slide system that represents the next generation of Alumil advanced systems. This system is designed to take full advantage of wide ranges with its minimal design with state-of-the-art technology. The S700 is a system of distinctive and unique features that clearly distinguishes it from the competition:

 

– Very narrow wing, 84 mm wide
– Wing fold width of only 47mm for two-leaf sliding system, for maximum light passage and door height up to 3.00 m
– Low thermal insulated threshold profile
– Intelligent water drainage system, perfect for heavy showers
– A smart drainage accessory under the folding profiles guarantees watertightness
– Special 24mm anti-distillation polyamides, to avoid “banana effect” due to large temperature differences on the outside and on the inside
– Very high thermal insulation (Uw up to 1.3 W / m2K)
– It can be a classic and a lift system with the same frame profile in circumference, retaining the same characteristics

ALUMIL S650 electronic

 

The sleek design and superior electric startup make this series the perfect solution for objects that require wide spans, perfect functionality and comfort, without restriction on housing.

 

– Material: AlMgSi0.5 (6060),
– Tensile strength: 215 N / mm2
– Brinell hardness: 2.75 Kg / dm3,
– Anode-oxide layer thickness: 18-23 microns,
– Coating thickness: 60-80 microns,
– Profile wall thickness: 1.4-2.0 mm,
– Thermal break: polyamide,
– Basic profile dimensions: wing – width 38mm / height 100mm,
– Fill: up to 20mm.

ALUMIL S560

 

The S560 is a robust lift system that provides high thermal insulation, construction flexibility and is ideal for large openings. The S560 offers the flexibility to help build windows and doors for small and very large openings. Due to the strength and construction of the profile, it provides a better connection between the outside and the interior.

– Frame width: 128 mm
– Wing width: 56 mm
– Minimum visible height of construction: 122.5 mm
– Frame height: 45 mm
– Wing height: 86mm
– Wing mechanism load capacity: 90, 150 and 300 Kg
– Maximum thickness of glass from 24 to 38 mm
– Maximum wall thickness up to 2 mm

ALUMIL S440

 

Alumil has created the innovative S440 sliding system in line with contemporary architectural trends and requirements for more energy efficient systems with excellent performance. This series is the ideal solution for sliding systems in Western Europe.

 

– Frame width 103 mm
– Wing width 44 mm
– Visible aluminum width 111.5 mm
– Frame height (guide) 45 mm
– Wing height 75 mm
– Interface profile width 39 / 78.5 mm
– Wing capacity up to 120 kg
– Glazing 32 mm
– Maximum wall thickness 1.5 – 2.5 mm, Polyamides 40 mm, 32 mm wide, PVC
– Insulation Polyamides 40 mm, 32 mm wide, PVC parts

ALUMIL M12000

 

The M12000 is a cold sliding system for solid, very high sliding positions, covering all types of typologies, with unique features completely hidden in the stainless steel floor.

 

– Frame width 122 mm
– Wing width 45 mm
– Minimum visible construction height 117,2 mm
– Wing mechanism load 130 Kg
– Maximum thickness of glass up to 32 mm
– Maximum wall thickness up to 1.5 mm

Feal sliding systems

TERMO 150

 

– Frame depth: 150 mm
– Wing Depth: 67 mm
– Filling depth: 14-54 mm
– Uw ≥ 1.2 W/m2K

TERMO 120

 

– Frame depth: 185 mm for three sliding walls,
– 120mm for two sliding walls
– Wing Depth: 50 mm
– Filling depth: 3 – 30 mm
– Uw ≥ 1.5 W/m2K

TERMO 80

 

– Frame depth: 124 mm for three sliding walls,
– 80mm for two slip walls
– Wing Depth: 32 mm
– Filling depth: 4 – 18 mm

TERMO 120-D+

 

– Frame depth: 126 mm
– Wing Depth: 56 mm
– Depth of fill: max. 44mm
– Threshold height: 20 mm
– Uw ≥ 1.4 W/m2K